DIY Picket Fence Wall Hooks
Posted by LIz
Here is a fun and easy project, picket fence wall hooks, made from literally some junk that could have just as easily wound up in the garbage… a piece of scrap wood and a few odd pieces of junk. I’m calling it a ‘picket fence’ wall hooks project, but we didn’t even have any old pickets on hand, so here’s what we did…
I started out thinking I was going to use a pallet for this project, but given all the huge staple pulling and severe sanding that was going to have to take place, I quickly diverted my focus once I found an old board leaning against the garage wall, I think it came out of the kitchen from when we gutted it.
I am not a carpenter, and though I’ve worked on many projects with carpenters, but I lack the fine skills of a carpenter, so this project is perfect for me. I also lack the desire to run power tools for the most part, and my husband was home and very willing to saw it all for me, so perfect! Let’s get going… here’s what I did:
After measuring the wall space where it was going to go, I marked the boards with a square:
Using a square really does help a lot to insure your line is actually straight. (although for this particular project it wouldn’t have mattered too much if it wasn’t)
Then with a simple Skilsaw, he sawed the several cuts in the board I just marked…
Ok, round 1 of cutting completed. (there’s the pallet I was initially going to do this project with)
I then free-hand marked the angles for the ‘picket’ look. I wanted this finished project to look rustic, so I purposely drew the angles off a bit.
Commence round 2 of cutting…
Once all the angles of the pickets were cut, I got out my sanding block with some rough sandpaper…
I lightly sanded the face of the boards, and rounded the edges and picket top. The super rough sandpaper in the sanding block works really fast on this.
Next step was to ‘whitewash’ the pickets. One quick coat of latex paint/primer did the trick.
Once the paint was dry, I re-sanded the pickets a bit more, adding a worn out, aged look.
In between the picket preparation, I dug through our junk drawer and found some old hooks that I had taken out of the maid’s room’s closet and some vintage back plates from a door handle. The hooks got a quick wipe with some steel wool and spray primer and paint.
There, now all the components are ready for assembly…
I used a bit of carpenter’s glue and then finish nails to attach the top horizontal board to the pickets.
I don’t like using most power tools, (they’re noisy and I always envision cutting my finger off with them… yikes!) except my drill…. I love my drill and have used it lots and lots. Here’s the perfect job for it too. Pre-drilling holes is so important to control where the screw goes and to avoid splitting the wood and to avoid the screw head getting stripped out before you actually get the screw all the way down.
On this picket fence wall hooks project, the way it attaches to the wall is with really long screws that go through the antique door knob plates into the wood into the wall.
And the screws I found in the garage that were the right length were this kind of tannish color so it blended with the brass painted back plates quite nicely.
The holes for the newly painted hooks were pre-drilled as well.
So there it is all done…
Kind of cute, huh?
Even though the picket fence hooks look worn out and a little rustic, it actually is smooth and won’t snag the clothing that is hung on it. And the perfect little spot for it, is behind the door in this guest bedroom we’ve been outfitting for grandchildren sleepovers.
Wasn’t that an easy little project? What fun thing can you make with a few minimal skills and some junk lying around your place?
Please feel free to share this blog with your friends, as well as on Facebook and Pinterest and Flipboard and Houzz the more the merrier! I appreciate you stopping by.
I am thrilled to use BlueHost for my self-hosted blog, their customer service is awesome!

Yay!! This post was featured at:
This post will be linked up at:
Skip to My Lou
Stone Gable
Home Stories A to Z
A Bowl Full of Lemons
Joy in Our Home
Design, Dining & Diapers
Too Much Time on My Hands
Related
Posted on May 18, 2015, in Bedroom, Decorating, DIY and Other Neighborhoods, DIY - Crafts - Floral, Hardware, Our 100 Yr Old House, Re-purposing, Uncategorized and tagged home to cottage, hometocottage, hooks, junk, picket, picket fence, repurposing, scrap wood. Bookmark the permalink. 3 Comments.


























Yes…it is cute! And you have the perfect spot for it!
super job on your picket fence wall hooks! I was just looking over the fb post I put up a couple of weeks ago, because I was writing the post where I have made one. I made mine this weekend, then I saw yours tonight!
I think it’s great that you made your boards look like pickets!
gail
Oh fun Gail! great minds think alike.
I’ll come check yours out too!